Why your irrigation system needs a service before summer

The best time to service your irrigation is late spring, before the first hot week. A service checks that every zone runs, every sprinkler pops up and covers properly, there are no leaks, and the controller is set for summer. That way you find the problems before your lawn and garden do.

Why spring is the time to check

Most systems barely run over a Melbourne winter. In those months sprinkler heads get buried by turf and mulch, nozzles block with dirt, valves stick, and controllers lose their settings after a power cut. None of it shows until the first 35-degree day, when a zone doesn't come on and the lawn browns off in a weekend.

A service in October or November gives you time to fix anything before it costs you plants or turf.

What we check on a Shaype irrigation service

  1. Every zone runs. We start each zone from the controller and confirm it opens, runs and shuts off.

  2. Pop-up sprinklers rise fully. Heads that have sunk, tilted or been grown over get raised, straightened and cleared.

  3. Coverage. Spray patterns should overlap so there are no dry gaps, and shouldn't be watering paths, fences or the house.

  4. Leaks. Soggy patches, pooling water, bubbling around heads and low pressure usually mean a broken fitting or pipe underground.

  5. Valves. Each valve should open and close cleanly, with no water weeping in the valve box.

  6. Drip lines in garden beds. We check for blocked drippers, split or chewed lines, and lines that have pulled loose.

  7. The controller. Correct time and date, summer run times, a working backup battery, and a rain sensor if one's fitted.

The faults we find most often

  • Wire joins that weren't done properly. A join that wasn't sealed properly lets water in. It corrodes, the signal drops out, and the zone stops coming on, often right when the weather turns hot.

  • Nozzles that need adjusting. Sprinklers get knocked, turf grows around them and spray arcs drift. Re-setting them puts the water back on the lawn instead of the path or the fence.

  • Sprinklers that are too crowded. Heads packed too close together leave some areas soggy while the system runs longer than it needs to.

  • The controller's off, but it's still watering. Usually debris caught in a valve, holding it partly open. Clearing it out fixes it.

Set it up for Melbourne's watering rules

Under Melbourne's permanent water use rules, watering systems for home and commercial gardens can only run between 6pm and 10am. You can hand water at any time with a hose fitted with a trigger nozzle. Early morning is the best time to run your system: less water is lost to evaporation and the garden dries off during the day.

Book a pre-summer service

Shaype services irrigation systems for homes, schools, sports grounds and owners corporations across Melbourne. Book an irrigation service or get in touch, and we'll get back to you by the next business day.

Shaype designs, installs and services irrigation across Melbourne. See our irrigation services.

Huw Williams

Huw Williams is the founder and director of Shaype Projects, a Melbourne landscape construction, earthworks and irrigation business based in Moorabbin. He quotes, walks the site and runs every job through to handover.

https://www.shaypeprojects.com.au/about
Previous
Previous

Signs your backyard has a drainage problem